Teletronics EZBridge Station Bridge Bedienungsanleitung PDF herunterladen

Donald^^11

Quick Installation

This guide

will demonstrate how to make a

connection between wired and wireless network

using Station/Bridge . First of all, y

ou have to prepare

an 802.11b Access Point connecting to local network.

You will be guided to install the Access Point

on your

network step by step.

If you encounter problems

during the installation, refer to your User Manual.

Introduction

The Station/Bridge

is compliant with the IEEE

802.11b (DSSS) specifications.

Small as the sparrow

is, it possesses all its internal organs.

Notebook

WA1300 Bridge/Station

Mac II

802.11b Access Point

Public Network

Figure 1: Network Connection

Package Contents

The following items should be included:

a) One Station/Bridge Mode Unit (the device).

b) One Power Adapter.

c) One User’s Manual.

d) One Quick Installation Guide.

If any items listed above

are damaged or missing,

please contact your dealer immediately.

System Requirements

One or more PCs (desktop or notebook) with Ethernet

interface.

b) TCP/IP protocol must be installed on all PCs.

Network cables. Use standard 10/100BaseT network

(UTP) cables with RJ45 connectors.

d) All w ireless devices must be compliant with the IEEE

802.11b specifications.

Microsoft Internet Explorer 5.0 or later or Netscape

Navigator 4.7 or later.

Installing Your Station/Bridge

Take windows 98 platform for example

Figure 2: Installation Diagram

In the following example, we set the SSID

(Network

name) of your Access Point to “wirelesslan

” under

this environment.

Installation Instructions

a) Use straight LAN cable to connect

the Station/Bridge

with a hub of the wired network.

b) C

onnect the power adapter to the power jack on the

Station/Bridge.

The Power LED (the right one) should be

on when the

power adapter is connected.

c) Use straight LAN cable to connect the PC with the

wired network.

d) Power on one of the PCs and log

in if you are asked to.

When you reach the desktop, click Start

on the

taskbar, select Settings , and then select

Control

Panel.

e) Double-click the Network icon. You will see a

dialog

box shown below.

Figure 3: Network Configuration

f) Select the TCP/IP protocol for your network card.

1 2

Donald^^11 1
2503501000 2

Inhaltsverzeichnis

Seite 1 - Donald^^11

Donald^^11 Quick Installation This guide will demonstrate how to make a connection between wired and wireless network by using Station/

Seite 2 - 2503501000

g) Click Properties. You will then see a dialog boxshown below . Figure 4: IP Address h) Ensure your TCP/IP settings are correct as

Kommentare zu diesen Handbüchern

Keine Kommentare

Teletronics EZBridge Station Bridge Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikation Teletronics EZBridge Station Bridge herunter. Teletronics EZBridge Station Bridge User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikation Teletronics EZBridge Station Bridge